LARKINPOWER

COMPONENTS

(800) 317-5526

Power Semiconductors, Testing Equipment and Refurbishing of Heat Sink Assemblies.

Home Test Equipment Thyristors Assemblies Testing & Engineering
Contact Us Cross reference Diodes / Rectifiers Power Modules Part Number List

 
POWER SEMICONDUCTOR TESTER - MODEL M5500

 

Designed for testing High Voltage Diodes, SCRs/Thyristors & GTOs, and Power Modules(including IGBTs and Darlington Transistors)

 

Tests up to 5500 V @ 10ma

Portable case

Identifies marginal components

Available for 110 or 220 VAC, 50/60 Hz

SPECIFICATIONS

Electrical specifications apply for an operating temperature range of 15oF to 120oF   (-10oC to 50oC),  relative humidity up to 80%

Input Voltage 100-125V, 50-60Hz, 2A
220-245V, 50-60Hz, 2A
High Voltage Mode (PRV/PFV)  
Peak Reverse and Forward Voltage 0 - 5800 Vpk
Peak Leakage Current @ 3 Mohm 1.83 mA
Short Circuit Current 10 mA

Gate Mode

 
Gate Voltage 0 - 20 VDC, 10 ohm source impedance
Anode Voltage 14 - 18 V, 10 ohm, 1/2 sine wave
Panel Meters  

PRV/PFV Mode

 
Peak Anode Voltage 6400 Vpk
Peak Leakage Current 19.99 mA

Oscilloscope Input

 

PRV/PFV Mode

 
X- axis (voltage) sensitivity 1.0 V/div=1000 V/div
Y-axis (current) sensitivity

1.0 V/div=10 mA/div

Gate Mode (Anode Voltage/Current Curve)

 
X- axis (voltage) sensitivity 2.0 V/div=10 V/div (Anode Voltage)
Y-axis (current) sensitivity 2.0 V/div=1 A/div (Anode Current)
Case Dimensions (L x W x D) 19" x 14" x 7"
Weight 20  Lbs.
Test Standard JEDEC JC22, RS397

 


Power Diodes